An extraordinary achievement, the TR System has revolutionized the industry with its single-pass die-score capability. Able to process up to 15,000 sheets per hour, the system perforates, scores, slits and, when combined with your existing 8 page folder, it delivers finished product five times faster than conventional methods.
You can configure it to execute right-angle processing and a wide variety of cutting heads will satisfy all of your custom needs. In addition to the speed and versatility of the TR System, you’ll enjoy a higher quality finished product. Crisp scores and razor sharp cuts that are flawless.
Single-pass processing allows you to confirm exact placement of scores, slits, etc. within seconds. This higher level of Quality Control lets you confidently process challenging jobs. And on-the-fly adjustments can be made to compensate for inconsistent press sheets, virtually eliminating waste. Best of all, you'll save money because the TR Die-Score System simultaneously performs three tasks with one operator.
Dedicated engineering has made the TR Die-Score System a successful choice for printers and binderies alike. Innovations include Rollem's patented S-Roll Corrugation system which guarantees your slit, score or perforations to be perfectly parallel. A powerful vacuum feeder handles stocks ranging from a 16 lb. carbonless to a 28 pt. board. Angular micrometer adjustments allow for corrections due to imperfections in press registration or stock irregularities.
Hardened ground concentric shafts maintain a perfect score depth while heavy duty upper and lower steady bearings achieves less than 1000th of an inch shaft displacement that commonly occurs during the processing of heavy weight stock.
The completely versatile TR System can be easily configured to fit any need.
Add an 8 page folding selection for high speed in-line scoring and folding. Create a customized mail production line with hot and cold glue systems and inkjet.
The Rollaway Right Angle (shown above) performs two-directional perforating, scoring and slitting. Features the new extended cross carrier for greater speed and a micrometer adjustable side guide for ultimate accuracy.
The multi-programmable feature makes way for strike/stop perfs and is ideal for T-perfing reply cards.
The Double Head model uses a two-stage process that lays a second deeper score over a first which eliminates cracking and achieves sharper creases on difficult stocks.
NEW Continuous Feeder
Finishing capabilities are expanded further with the addition of the new
Continuous Feeder, enabling the un-interrupted feeding of stock with no
pile run out. Ideal for larger runs and high-volume scoring and
perforating jobs, this feeder is Rollem's newest product designed for
larger finishing operations. As many as a few thousand sheets of
material can be loaded at once and can be replaced while the machine is running.
| TR Die-Score Specifications |
| Minimum Sheet Size: |
|
TR30
4"x5"
TR36 4"x5"
TR42 4"x5" |
| Maximum Sheet Size: |
|
TR30
29x30"
TR36 35x36"
TR42 41x42" |
| Floor
Space: |
|
TR30
48"x10'
TR36 54"x12'
TR42 60"x14' |
| Feeding
Systems: |
|
Top
Air Feed |
| Stock: |
|
16
lb Carbonless to 28 pt. board |
| Speeds: |
|
Up
to 15,000 sheets per hour |
| Electrical requirements: |
|
220 V3 phase |
| Gross Weight: |
|
TR30
980 lbs.
TR36 1,250 lbs.
TR42 1,422 lbs |
